# WireGuard Easy [![Build & Publish Docker Image to Docker Hub](https://github.com/WeeJeWel/wg-easy/actions/workflows/deploy.yml/badge.svg?branch=production)](https://github.com/WeeJeWel/wg-easy/actions/workflows/deploy.yml) [![Lint](https://github.com/WeeJeWel/wg-easy/actions/workflows/lint.yml/badge.svg?branch=master)](https://github.com/WeeJeWel/wg-easy/actions/workflows/lint.yml) [![Docker](https://img.shields.io/docker/v/weejewel/wg-easy/latest)](https://hub.docker.com/r/weejewel/wg-easy) [![Docker](https://img.shields.io/docker/pulls/weejewel/wg-easy.svg)](https://hub.docker.com/r/weejewel/wg-easy) [![Sponsor](https://img.shields.io/github/sponsors/weejewel)](https://github.com/sponsors/WeeJeWel) You have found the easiest way to install & manage WireGuard on any Linux host!

## Features * All-in-one: WireGuard + Web UI. * Easy installation, simple to use. * List, create, edit, delete, enable & disable clients. * Show a client's QR code. * Download a client's configuration file. * Statistics for which clients are connected. * Tx/Rx charts for each connected client. * Gravatar support. ## Requirements * A host with a kernel that supports WireGuard (all modern kernels). * A host with Docker installed. ## Installation ### 1. Install Docker If you haven't installed Docker yet, install it by running: ```bash $ curl -sSL https://get.docker.com | sh $ sudo usermod -aG docker $(whoami) $ exit ``` And log in again. ### 2. Run WireGuard Easy To automatically install & run wg-easy, simply run:
$ docker run -d \
  --name=wg-easy \
  -e WG_HOST=🚨YOUR_SERVER_IP \
  -e PASSWORD=🚨YOUR_ADMIN_PASSWORD \
  -v ~/.wg-easy:/etc/wireguard \
  -p 51820:51820/udp \
  -p 51821:51821/tcp \
  --cap-add=NET_ADMIN \
  --cap-add=SYS_MODULE \
  --sysctl="net.ipv4.conf.all.src_valid_mark=1" \
  --sysctl="net.ipv4.ip_forward=1" \
  --restart unless-stopped \
  weejewel/wg-easy
> 💡 Replace `YOUR_SERVER_IP` with your WAN IP, or a Dynamic DNS hostname. > > 💡 Replace `YOUR_ADMIN_PASSWORD` with a password to log in on the Web UI. The Web UI will now be available on `http://0.0.0.0:51821`. > 💡 Your configuration files will be saved in `~/.wg-easy` ### 3. Sponsor Are you enjoying this project? [Buy me a beer!](https://github.com/sponsors/WeeJeWel) 🍻 ## Options These options can be configured by setting environment variables using `-e KEY="VALUE"` in the `docker run` command. | Env | Default | Example | Description | | - | - | - | - | | `PASSWORD` | - | `foobar123` | When set, requires a password when logging in to the Web UI. | | `WG_HOST` | - | `vpn.myserver.com` | The public hostname of your VPN server. | | `WG_PORT` | `51820` | `12345` | The public UDP port of your VPN server. WireGuard will always listen on `51820` inside the Docker container. | | `WG_MTU` | `null` | `1420` | The MTU the clients will use. Server uses default WG MTU. | | `WG_PERSISTENT_KEEPALIVE` | `0` | `25` | Value in seconds to keep the "connection" open. | | `WG_DEFAULT_ADDRESS` | `10.8.0.x` | `10.6.0.x` | Clients IP address range. | | `WG_DEFAULT_DNS` | `1.1.1.1` | `8.8.8.8, 8.8.4.4` | DNS server clients will use. | | `WG_ALLOWED_IPS` | `0.0.0.0/0, ::/0` | `192.168.15.0/24, 10.0.1.0/24` | Allowed IPs clients will use. | | `WG_POST_UP` | `...` | `iptables ...` | See [config.js](https://github.com/WeeJeWel/wg-easy/blob/master/src/config.js#L19) for the default value. | | `WG_POST_DOWN` | `...` | `iptables ...` | See [config.js](https://github.com/WeeJeWel/wg-easy/blob/master/src/config.js#L26) for the default value. | > If you change `WG_PORT`, make sure to also change the exposed port. # Updating To update to the latest version, simply run: ```bash docker stop wg-easy docker rm wg-easy docker pull weejewel/wg-easy ``` And then run the `docker run -d \ ...` command above again.