MigrateRepos/wg-easy
1
0
Fork 0
mirror of https://github.com/WeeJeWel/wg-easy.git synced 2024-12-22 17:19:23 +08:00
Code Issues Projects Releases Wiki Activity

update readme

Browse Source
This commit is contained in:
Emile Nijssen 2021-11-22 22:37:07 +01:00
parent bbc8bf1ba2
commit 98a40949a8
1 changed files with 29 additions and 33 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
README.md
View File

@ -9,7 +9,7 @@
You have found the easiest way to install & manage WireGuard on any Linux host!
<p align="center">
<img src="./assets/screenshot.png" width="702" />
<img src="./assets/screenshot.png" width="802" />
</p>
## Features
@ -20,6 +20,7 @@ You have found the easiest way to install & manage WireGuard on any Linux host!
* Show a client's QR code.
* Download a client's configuration file.
* Statistics for which clients are connected.
* Tx/Rx charts for each connected client.
* Gravatar support.
## Requirements
@ -41,42 +42,37 @@ $ exit
And log in again.
You might need to install docker-compose separately. For example, on a Raspberry Pi:
### 2. Run WireGuard Easy
```bash
sudo apt-get install docker-compose
```
To automatically install & run wg-easy, in a terminal:
### 2. Configure WireGuard
<pre>
docker run -d \
--name=wg-easy \
--cap-add=NET_ADMIN \
--cap-add=SYS_MODULE \
-e WG_HOST=<b>YOUR_SERVER_IP</b> \
-e PASSWORD=<b>YOUR_ADMIN_PASSWORD</b> \
-v ~/.wg-easy:/etc/wireguard \
-p 51820:51820/udp \
-p 51821:51821/tcp \
--sysctl="net.ipv4.conf.all.src_valid_mark=1" \
--sysctl="net.ipv4.ip_forward=1" \
--restart unless-stopped \
weejewel/wg-easy
</pre>
Run these commands to prepare and configure WireGuard.
> 🌍 Replace `YOUR_SERVER_IP` with your WAN IP, or a Dynamic DNS hostname.
>
> 🔑 Replace `YOUR_ADMIN_PASSWORD` with a password to log in on the Web UI.
```bash
$ mkdir ~/.wg-easy
$ cd ~/.wg-easy
$ wget https://raw.githubusercontent.com/WeeJeWel/wg-easy/master/docker-compose.yml
$ vim docker-compose.yml
```
The Web UI will now be available on `http://0.0.0.0:51821`.
Change `WG_HOST=raspberrypi.local` to your server's public address, e.g. `WG_HOST=vpn.mydomain.com`.
Optionally, set a Web UI password by uncommenting `PASSWORD=foobar123` and change the password.
> By default, any WireGuard client will have access to the Web UI, unless you set a password.
### 3. Run WireGuard
Finally, run WireGuard. It will automatically start after a reboot.
```bash
$ docker-compose up --detach
```
The Web UI will be available on `http://0.0.0.0:51821`. You can create new clients there.
> 💾 Your configuration files will be saved in `~/.wg-easy`
## Options
These options can be configured in `docker-compose.yml` under `environment`.
These options can be configured by setting environment variables using `-e KEY="VALUE"` in the `docker run` command.
| Env | Default | Example | Description |
| - | - | - | - |
@ -95,8 +91,8 @@ These options can be configured in `docker-compose.yml` under `environment`.
To update to the latest version, run:
```bash
docker-compose down
docker-compose pull
docker-compose up --detach --remove-orphans
docker image prune
docker stop wg-easy
docker rm wg-easy
```
And then run the 'Run WireGuard Easy' command above again.