mirror of
https://github.com/WeeJeWel/wg-easy.git
synced 2024-12-23 01:29:24 +08:00
103 lines
3.5 KiB
Markdown
103 lines
3.5 KiB
Markdown
# WireGuard Easy
|
|
|
|
[](https://github.com/WeeJeWel/wg-easy/actions/workflows/deploy.yml)
|
|
[](https://github.com/WeeJeWel/wg-easy/actions/workflows/lint.yml)
|
|
[](https://hub.docker.com/r/weejewel/wg-easy)
|
|
[](https://hub.docker.com/r/weejewel/wg-easy)
|
|
[](https://github.com/sponsors/WeeJeWel)
|
|
|
|
You have found the easiest way to install & manage WireGuard on any Linux host!
|
|
|
|
<p align="center">
|
|
<img src="./assets/screenshot.png" width="802" />
|
|
</p>
|
|
|
|
## Features
|
|
|
|
* All-in-one: WireGuard + Web UI.
|
|
* Easy installation, simple to use.
|
|
* List, create, edit, delete, enable & disable clients.
|
|
* Show a client's QR code.
|
|
* Download a client's configuration file.
|
|
* Statistics for which clients are connected.
|
|
* Tx/Rx charts for each connected client.
|
|
* Gravatar support.
|
|
|
|
## Requirements
|
|
|
|
* A host with a kernel that supports WireGuard (all modern kernels).
|
|
* A host with Docker installed.
|
|
|
|
## Installation
|
|
|
|
### 1. Install Docker
|
|
|
|
If you haven't installed Docker yet, install it by running:
|
|
|
|
```bash
|
|
$ curl -sSL https://get.docker.com | sh
|
|
$ sudo usermod -aG docker $(whoami)
|
|
$ exit
|
|
```
|
|
|
|
And log in again.
|
|
|
|
### 2. Run WireGuard Easy
|
|
|
|
To automatically install & run wg-easy, simply run:
|
|
|
|
<pre>
|
|
$ docker run -d \
|
|
--name=wg-easy \
|
|
-e WG_HOST=<b>🚨YOUR_SERVER_IP</b> \
|
|
-e PASSWORD=<b>🚨YOUR_ADMIN_PASSWORD</b> \
|
|
-v ~/.wg-easy:/etc/wireguard \
|
|
-p 51820:51820/udp \
|
|
-p 51821:51821/tcp \
|
|
--cap-add=NET_ADMIN \
|
|
--cap-add=SYS_MODULE \
|
|
--sysctl="net.ipv4.conf.all.src_valid_mark=1" \
|
|
--sysctl="net.ipv4.ip_forward=1" \
|
|
--restart unless-stopped \
|
|
weejewel/wg-easy
|
|
</pre>
|
|
|
|
> 💡 Replace `YOUR_SERVER_IP` with your WAN IP, or a Dynamic DNS hostname.
|
|
>
|
|
> 💡 Replace `YOUR_ADMIN_PASSWORD` with a password to log in on the Web UI.
|
|
|
|
The Web UI will now be available on `http://0.0.0.0:51821`.
|
|
|
|
> 💡 Your configuration files will be saved in `~/.wg-easy`
|
|
|
|
### 3. Sponsor
|
|
|
|
Are you enjoying this project? [Buy me a beer!](https://github.com/sponsors/WeeJeWel) 🍻
|
|
|
|
## Options
|
|
|
|
These options can be configured by setting environment variables using `-e KEY="VALUE"` in the `docker run` command.
|
|
|
|
| Env | Default | Example | Description |
|
|
| - | - | - | - |
|
|
| `PASSWORD` | - | `foobar123` | When set, requires a password when logging in to the Web UI. |
|
|
| `WG_HOST` | - | `vpn.myserver.com` | The public hostname of your VPN server. |
|
|
| `WG_PORT` | `51820` | `12345` | The public UDP port of your VPN server. WireGuard will always listen on `51820` inside the Docker container. |
|
|
| `WG_PERSISTENT_KEEPALIVE` | `0` | `25` | Value in seconds to keep the "connection" open. |
|
|
| `WG_DEFAULT_ADDRESS` | `10.8.0.x` | `10.6.0.x` | Clients IP address range. |
|
|
| `WG_DEFAULT_DNS` | `1.1.1.1` | `8.8.8.8, 8.8.4.4` | DNS server clients will use. |
|
|
| `WG_ALLOWED_IPS` | `0.0.0.0/0, ::/0` | `192.168.15.0/24, 10.0.1.0/24` | Allowed IPs clients will use. |
|
|
|
|
> If you change `WG_PORT`, make sure to also change the exposed port.
|
|
|
|
# Updating
|
|
|
|
To update to the latest version, simply run:
|
|
|
|
```bash
|
|
docker stop wg-easy
|
|
docker rm wg-easy
|
|
docker pull weejewel/wg-easy
|
|
```
|
|
|
|
And then run the `docker run -d \ ...` command above again. |